Severn Valley Sailplanes - Glider Data loggers

Data Loggers

Modern gliders carry an array of sophisticated electronics to log and track their progress across the sky. We offer several models from Filser. We also offer a selection of accessories to enable you to install them in your glider

Data Loggers

Colibri:-

Smallest logger with High level IGC approval

All you need to claim badges, records or competition flights

It is small in size, but big in functionality. Standalone it is useful for navigation, wind calculation and tracking of engine status.

The newest firmware - Version 3.01 - now includes near airport function and changes to the next turnpoint in task automatically. Versions later than 2.1 include full WinPilot PRO support.

Connected to LX 160 and WinPilot or LX 7000 it becomes part of a serious Flight System.

Current software version	3.01
Dimensions	59mm x 35mm x 98mm (WxHxD)
Weight	200g
Engine Noise Level	Yes
Memory	50 hours at 12sec recording interval
Database	600 waypoints 100 tasks 4500 airfields

Qty :

Cambridge Model 302A CFR:

Secure IGC flight logger

The 302A includes an internal GPS receiver. The 302A CFR is an FAI-approved secure Flight Recorder. An optional external backup battery provides more than one hour of operation, including flight recording, if the glider battery fails. The 302A CFR outputs NMEA 0183 including the GPS altitude sentence. This allows the connection of Pocket-PCs running third party nav computer software.

Fixing	57 mm Hole mounting
Dimensions	64mm x 64mm x 153mm
Weight	?
Engine Noise Level	Yes
Memory	100 hours at 4sec recording interval
Database	1500 waypoints

Qty :

LX20 Data Logger

Flight recorder with High level IGC approval

The LX 20 is your partner in navigation

The big display of LX 20 enables you to navigate round the task on a single page, showing also wind speed with direction and final glide calculation.

Moving map enables you to see the airspace you should avoid and where the turning points sectors which you should enter start. Since version 5.2 AAT are supported in LX20.

In addition you will like the statistics report immediately after start, near airport function, built-in customisable Jeppesen airport database and many others.

Current software version	5.2
LCD resolution	128 x 64 pixels
Dimensions	145 x 90 x 45mm
Weight	600g
Engine Noise Level	Yes
Memory	53 hours at 12sec recording interval
Database	600 waypoints 100 tasks 4500 airfields

Qty :

Colibri & LX20 Leads:- A range of ready made leads to suit the LX 20 and Colibri Logger. For our full range of leads "Click Here"

Qty :

Colibri Mount

A carbon fibre mount to allow simple and fuss free mounting of the Colibri within the cockpit.

Qty :

6 way RJ/FCC 68 Connector

Used to connect to the Colibri & LX20 data port

Qty :

RJ/FCC 68 Crimping Tool

A professional quality crimping to allow the manufacture or alteration of the FCC68 style cables

Qty :

Flat 6 way data cable

To suit the requirements of both the Colibri and LX20

@ per metre

Qty :